Pulsed Single Frequency (AP-P-SF-1030)

Back to λ ~ 1.5 µm
λ ~ 1.5 µm

Pulsed Single Frequency (AP-P-SF-1030)

  • Single longitudinal mode
  • High pulse energy
  • Customizable operating wavelength
  • Nanosecond pulses
  • Near diffraction limited beam quality
  • Turn-key system with no maintenance required
  • Lidar
  • Frequency Conversion
  • Mid-IR Generation
  • Spectroscopy
Ask a Question

AP-P-SF-1030

File name : AP-P-SF-1030-17.2.pdf

×

Downloads

Optical Characteristics

ParameterSpecification
Operation Mode

Pulsed

Spectral linewidth

Single Frequency (single longitudinal mode)

Typical operating wavelength

1.03 µm

Max. pulse energy

Up to 1.2 mJ

Pulse width

2 ns to 300 ns (non-adjustable, factory selectable)

Pulse repetition rate

10 kHz to 1 MHz (non-adjustable, factory selectable)

Max. average power
Up to 100 W
Beam quality, M2
< 1.2
Output polarization
Linear Polarization
Output delivery
Free space collimated beam ~ 1 mm diameter (beam expansion available)

(For special requirement, please contact AdValue Photonics for options.)

General Characteristics

ParameterSpecification
Operating Temperature

+10 to +35 °C

Storage temperature

-10 to +70 °C

Cooling

Water cooled

Power supply requirement

AC 100~240 V (50/60Hz)

Warm-up time

10 minutes

Package dimensions
450(W) x 400(D) x 145(H) mm (optical module only, not including a separate control unit)

Mechanical Drawings

Advalue Photonics logo

2700 E Bilby Rd
Tucson, AZ 85706, USA

Phone: 520-790-5468
Fax: 520-790-1158
E-mail: Contact@AdValuePhotonics.com
Sales: Sales@AdValuePhotonics.com
Human Resources: HR@AdValuePhotonics.com

Copyright © AdValue Photonics - Fiber Lasers, All Rights Reserved.