1 μm Pulsed Single Frequency Laser

Pulsed Single Frequency (AP-P-SF-1030)

1 μm Pulsed Single Frequency (AP-P-SF-1030)

  • Single longitudinal mode
  • High pulse energy
  • Customizable operating wavelength
  • Nanosecond pulses
  • Near diffraction limited beam quality
  • Turn-key system with no maintenance required
Applications

    • Lidar
    • Mid-IR generation
    • Frequency Conversion
    • Spectroscopy

Optical Characteristics

ParameterSpecification
Operation Mode

Pulsed

Spectral Linewidth

Single Frequency (single longitudinal mode)

Typical Operating Wavelength
1.03 µm
Max. Pulse Energy
Up to 1.2 mJ
Pulse Width
2 ns to 300 ns (non-adjustable, factory selectable)
Pulse Repetition Rate

10 kHz to 1 MHz (non-adjustable, factory selectable)

Max. Average Power
Up to 100 W
Beam Quality, M²
< 1.2
Output Polarization
Linear Polarization
Output Delivery
Free space collimated beam ~ 1 mm diameter (beam expansion available)

(For special requirement, please contact AdValue Photonics for options.)


General Characteristics

ParameterSpecification
Operating Temperature
+10 to +35 °C
Storage Temperature

-10 to +70 °C

Cooling
Water Cooled
Power Supply Requirement
AC 100~240 V (50/60Hz)
Warm-Up Time
10 minutes
Package Dimensions
450(W) x 400(D) x 145(H) mm (optical module only, not including a separate control unit)

AP-P-SF-1030 Specification Sheet

AP-P-SF-1030-17.2.pdf

×

Downloads

Copyright © AdValue Photonics - Fiber Lasers, All Rights Reserved.