2 μm High Power Mode-Locked Fiber Laser

2 μm High Power Mode-Locked Fiber Laser (AP-ML2)

  • High pulse energy
  • High peak power
  • Near diffraction limited beam quality
  • Turn-key system with no maintenance required
Applications

  • Mid-IR generation

  • Nonlinear optics studies
  • Spectroscopy
  • Micromachining
Ask a Question

2 μm High Power Mode-Locked Fiber Laser (AP-ML2) Specification Sheet

File name : AP-ML2_16.1.pdf

Downloads

Optical Characteristics

ParameterSpecification
Operating Wavelength

1.95 μm ± 0.05 µm

Pulse Width
800 fs with external pulse compressor (shorter or longer pulse width available)
Max. Pulse Energy

10 µJ (higher or lower pulse energy available)

Pulse Repetition Rate

100 kHz to 500 kHz (non-adjustable, factory set)

Max. Average Power

3 W (nominal)

Output Polarization
Random
Beam Quality, M²
< 1.3
Output Beam
Free-space collimated beam ~ 3 mm diameter (beam expansion available)

(For special requirement, please contact AdValue Photonics for options.)

General Characteristics

ParameterSpecification
Operating Temperature
+18 to +30 °C
Storage Temperature

-10 to +70 °C

Cooling

Forced Air

Power Supply Requirement
AC 100~240 V (50/60Hz)
Warm-Up Time

10 minutes

Package Dimensions
450(W) x 350(D) x 145(H) mm (optical module only, not including a separate pump unit)
Advalue Photonics logo

2700 E. Bilby Rd.,
Tucson, AZ 85706, USA
Tel: +1.520.790.5468
Fax: +1.520.790.1158
E-mail: contact@advaluephotonics.com
Sales: sales@advaluephotonics.com
Human Resources: hr@advaluephotonics.com

Copyright © AdValue Photonics - Fiber Lasers, all rights reserved.